Dual Compact Self Retracting Life Line - 6 Ft - Aluminum F

SRWV845526006LE Dual Compact Self Retracting Life Line - 6 Ft - Aluminum F <p><strong>SPECIAL ORDER -&nbsp;May take extra time to receive</strong></p><p>&nbsp;</p><p>PeakWorks - Dual Compact Self Retracting Life Line - 6 Ft - Aluminum Form Hook - Leading Edge</p><p><strong>Features and Benefits:</strong></p><ul> <li>Color: Hi-Viz Green</li> <li>Capacity (lb.): 300 lb</li> <li>Anchor Hook Material: Aluminum</li> <li>Anchor Hook Type: Form Hook</li> <li>Body Hook Type: Connection Pin</li> <li>Average Arrest Force: 765 lbf (3.4kN)</li> <li>Class Type: A</li> <li>Gate Opening (in.): 2.5"</li> <li>Housing Material: Aluminum</li> <li>Leading Edge: Yes</li> <li>Leg Type: Twin</li> <li>Length (ft.): 6'</li> <li>Maximum Total Arrest Distance - Non-Leading Edge application (in.): 24"</li> <li>Maximum Total Arrest Distance - Non-Leading Edge application (in.): 24"</li> <li>Minimum Fall Clearance - Non-Leading Edge application (ft.): 6'</li> <li>Minimum Fall Clearance - Leading Edge application (ft.): 13'</li> <li>Minimum set back distance from edge - Leading Edge application (in.): 12"</li> <li>Webbing/Cable Width (in.): 0.77"</li> <li>Certification: CSA Z259.2.2-98 Type 2|LE certified|ANSI Z359.14-2014, Class A|OSHA</li> <li>Lifeline Material: Dyneema®</li> <li>Rescue and Recover - SRL-R: No</li> <li>Special Features: Sewn-in Indicator|Lightweight</li> <li>Dual Leg Compact SRL-LE - This device is also among the lightest in the industry. SRL's that are Leading Edge certified can be used in both overhead and Leading-Edge applications. What is a Leading Edge? - A leading edge can be described as any sharp edge commonly found on a worksite, with which a cable or webbing connection could come into direct contact during a fall. There is considerable force at play during a fall, and a non-Leading-Edge SRL (cable or webbing) may cut or snap at a sharp edge during the fall</li> <li>Leading Edge (LE) self-retracting lifelines are designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edge, for example when working over structural steel or in high-rise concrete buildings under construction with open flooring. An SRL Leading Edge (LE) device is an SRL that has enhanced design features for use in leading edge applications</li> <li>it provides additional protection against the sharp or abrasive surfaces found on many construction sites and can withstand a fall over a leading edge.</li> <li>Attachment points include a swivel eye on housing with connection pin for mounting below the dorsal D-ring.</li> <li>Dyneema® webbing lifeline has been sharp edge tested over a .005" radius sharp edge. PeakWorks webbing SRL�s are manufactured using special 0.1" (2.5 mm) thick, 1" (25 mm) wide Dyneema® Core materials, giving them one of the highest performances of this type of fiber in the world. The webbing features a sewn-in indicator on the lifeline itself for maximum safety.</li> <li>Class A rating means the fall distance is less than 2 ft. (0.6m) or less when connected overhead (non-LE application). Leading edge minimum fall clearance of 13 ft. (4m) required.</li> <li>300 Lbs. Capacity. 6� Working Length. Aluminum form hook gate opening: 2.5”. Certified to ANSI 2359.14 and CSA Z259.2.1.</li></ul> Peakworks